Difference between revisions of "User:Nagamasa/Turn instruction override"

From Wazeopedia
(Supplement a wayfinder: fixes to wayfinder section)
 
(37 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
WME provides an ability to override the turn instructions provided during navigation so that editors can customize those instructions to better match the reality of the road.  
 
WME provides an ability to override the turn instructions provided during navigation so that editors can customize those instructions to better match the reality of the road.  
{{mbox|type=important|text=There is to be '''no campaign''' to replace existing wayfinders, micro-dog-legs, or any other segment-based structure with a Turn Instruction Override. Also, restraint should be exercised to not use this feature to create an alternate default condition for a large area simply because you don't like the Waze default response.}}
+
 
 +
Use a turn instruction override whenever [[How Waze determines turn / keep / exit maneuvers|the default ''Waze selected'' instruction]] is not the desired instruction for the driver. The TIO replaces [[How Waze determines turn / keep / exit maneuvers|the default ''Waze selected'' instruction]] entirely, including the [[TTS]] and instruction list.
 +
{{mbox|type=important|text=Don't worry about replacing existing intersection designs that currently produce the desired instruction, but using other means of doing so (such as [[Glossary#mDL | micro-doglegs]] and a [[Junction Style Guide#Roads_to_Nowhere | virtual stub segment]]). We can get to those as we need to.}}
  
 
{{TOC}}
 
{{TOC}}
  
==Creation==
+
==How to use==
{{mbox|type=neweditor|text=Before you set a Turn Instruction Override, It is highly recommended that you consult with a State Manager or other senior editor.}}
+
 
 +
=== Creation ===
 +
{{mbox|type=neweditor|text=Before you set a Turn Instruction Override, It is highly recommended that you consult with a [[State Manager]] or other senior editor.}}
  
 
[[File:Wme_turn_override_hover2.png|left]]
 
[[File:Wme_turn_override_hover2.png|left]]
  
When in WME and you click on a segment and hover over a green or yellow turn connection/restriction arrow, both the Time-based Turn Restriction (TBTR) clock ''and'' the Turn instruction Override (TIO) speaker icon will appear. If the turn is red (restricted), then the override icon will not appear.
+
When in WME and you click on a segment and hover over a green or yellow turn connection/restriction arrow, both the [[Time based turn restrictions|Time-based Turn Restriction]] (TBTR) clock ''and'' the Turn instruction Override (TIO) speaker icon will appear. If the turn is red (restricted), then the override icon will not appear.
 +
 
 +
Click on the TIO icon to select an override.
 
{{clear}}
 
{{clear}}
  
  
==Available options==
+
===Available options===
 
When you click on the '''speaker''', you have the following choices:
 
When you click on the '''speaker''', you have the following choices:
 
[[File:Wme_turn_override_list.png]]
 
[[File:Wme_turn_override_list.png]]
 
{{clear}}
 
{{clear}}
*Waze Selected (default) (this gives the default voice prompt turn, exit, keep right/left, which is defined by street names, angles, road types, etc)
+
*Waze Selected (default) (this gives the [[How Waze determines turn / keep / exit maneuvers|default voice prompt]])
*None (No verbal instruction is given)
+
*None (No instruction is given)
 
*Turn left (The instruction "turn left" is given)
 
*Turn left (The instruction "turn left" is given)
 
*Turn right (The instruction "turn right" is given)
 
*Turn right (The instruction "turn right" is given)
Line 30: Line 36:
 
When something other than "Waze Selected" is the selected option, the Instruction override speaker icon changes from [[Image:Wme_override_speaker_icon.png]] (cyan) to [[Image:Wme_override_speaker_icon_active.png]] (orange). This icon is shown when you hover over a turn arrow.
 
When something other than "Waze Selected" is the selected option, the Instruction override speaker icon changes from [[Image:Wme_override_speaker_icon.png]] (cyan) to [[Image:Wme_override_speaker_icon_active.png]] (orange). This icon is shown when you hover over a turn arrow.
  
== <br> When to use ==
+
=== Identifying on the map ===
 +
#The default way to determine that a turn has an override set is to hover over the turn arrow.
 +
#[[Plugins#WME_Toolbox|Toolbox]] helps to make identifying turns with override instructions set.
 +
 
 +
=== Removal ===
 +
To remove a TIO, simply set the option back to ''Waze Selected''.
 +
 
 +
== When not to use ==
 +
 
 +
=== You don't like the Waze default ===
 +
Don't use a TIO to override the default just because you don't like it. We can't manage changing thousands and thousands of intersections like this.
 +
 
 +
=== Override is the same as ''Waze selected'' ===
 +
Do not set a TIO if the override would be the same instruction as the Waze-selected one. It just adds work for fellow editors to verify.
 +
 
 +
===Complex wayfinder===
 +
A complex wayfinder is one where the legs (s-out) are named differently than the subsequent segments. The wayfinder segments are named for the Big Green Sign (BGS) verbiage for clarity.
 +
 
 +
For these kinds of wayfinders, a turn instruction override alone doesn't provide sufficient clarity. Use in conjunction with a [[wayfinder]].
 +
 
 +
===Common on-ramp===
 +
An "exit" instruction for common on-ramp departures from surface streets, while not immediately intuitive for many new Wazers, is nevertheless Waze's current default. Overriding this default on a large scale could lead to problems. Meanwhile our only alternative, the "keep" instruction ("stay" in some voices), is not always significantly clearer. Except for [[Turn_instruction_override#Unusual on-ramp|rare cases]], overriding the default "exit" instruction for on-ramps is not encouraged.
 +
 
 +
=== Continue TIO ===
 +
 
 +
==== Obvious continuations ====
 +
Keep calm! Our Wazers have memory better than a goldfish. They don't need to be reminded to Continue straight at every intersection. Wazers are already told when or how far their next turn is after every turn.
 +
 
 +
==== Not impactful or unsigned name changes ====
 +
Keep the turn instructions useful; don't announce simple road name changes such as when a neighborhood road changes name or if the cardinal direction changes.
 +
 
 +
Similarly, some freeways are unsigned. We do not need to place TIOs when these begin or end, as they provide no value to the Wazer.
 +
 
 +
==== Intermediate barrier tolls ====
 +
In keeping instructions useful, it would be superfluous to inform a Wazer of each and every intermediate toll barrier in a [[wikipedia:Barrier_toll_system|barrier-toll system]].
 +
 
 +
== When to use ==
  
 
=== U-turn ===
 
=== U-turn ===
Line 44: Line 86:
  
 
==== At-grade connector ====
 
==== At-grade connector ====
Depending on the length of an at-grade connector, it may make sense for it to either instruct "keep right/left" or "turn right/left." Use a TIO to ensure the app voices the most appropriate instruction to the driver. An example of an at-grade connector using an instruction override is shown below:
+
Depending on the length and angle of an [[at-grade connector]], it may make sense for Waze to instruct "keep right/left" or "turn right/left". Use a TIO to ensure the the most appropriate instruction is given to the driver. An example of an at-grade connector using an instruction override is shown below:
  
 
[[File:Wme_agc_override_turn_instruction.png]]
 
[[File:Wme_agc_override_turn_instruction.png]]
Line 51: Line 93:
 
===Exit/keep===
 
===Exit/keep===
 
====Exit left====
 
====Exit left====
[[File:Exit_left_bgs_example1.png|left]]When there is a the Big Green Sign (BGS) indicating an exit left. Discuss with your Regional Coordinator(s) and/or State Manager(s) to see if they want it added to locations where a HOV or HOT/Express Lane is separated from the regular freeway, highway, etc.
+
[[File:Exit_left_bgs_example1.png|left]]When there is a the [[Glossary#Big Green Sign|Big Green Sign]] (BGS) indicating an exit left. Discuss with your [[Regional Coordinator|Regional Coordinator(s)]] and/or State Manager(s) to see if they want it added to locations where a [[HOV lane|HOV or HOT/Express Lane]] is separated from the regular freeway, highway, etc.
 
[[File:Wme turn override set hover.png|left]]
 
[[File:Wme turn override set hover.png|left]]
 
{{clear}}
 
{{clear}}
  
===Simple wayfinder===
+
====Simple wayfinder====
[[File:Wme_instruction_override_left_and_right.png|right]] Simple wayfinders use a turn instruction override where an instruction would not normally be voiced. This is most often a "stay right" or "stay left." A basic example is a roadway with a split where left lanes turn left and right lanes go straight ahead. To ensure the driver is kept on the correct side of the roadway to stay on the expected route, we create an instruction override to ensure the driver is given enough advance noticed to make sure they are on the correct side  
+
[[File:Wme_instruction_override_left_and_right.png|right]] Simple wayfinders use a turn instruction override where an instruction would not normally be voiced. This is most often a "stay to the right" or "stay to the left." A basic example is a roadway with a split where left lanes turn left and right lanes go straight ahead.
 +
 
 +
<nowiki> </nowiki>To ensure the driver is kept on the correct side of the roadway to stay on the expected route, we create an instruction override to ensure the driver is given enough advance notice to make sure they are on the correct side  
 +
 
 +
The image here is a composite showing both turns with the override set and which instruction has been applied in this specific case. Drivers continuing straight, the app will give the driver the instruction "stay to the right to El Cajon Blvd." For drivers getting into the on-ramp, the app will say, "turn to the left to I-8 W."{{clear}}
 +
 
 +
====Unusual on-ramp====
 +
A default surface-road-to-on-ramp "exit" instruction may be overridden with a "keep" in rare cases when:
 +
# the originating highway's continuation path is unclear (such situations often require wayfinders as well) or;
 +
# the on-ramp's initial departure continues to share direction and pavement with the originating highway, either for an unexpectedly long distance, or leading to two or more subsequent distributor on-ramps that are better instructed as exits than the initial departure. The latter application avoids issuing multiple "exit" instructions for what is effectively the same on-ramp. Aside from the above situations, overriding the default "exit" instruction for surface-road-to-on-ramp departures is not encouraged (see [[Turn_instruction_override#Common on-ramp|below]]).
 +
===Continue===
 +
 
 +
==== Unannounced roads with legal or financial implications ====
  
The image here is a composite showing both turns with the override set and which instruction has been applied in this specific case. Drivers continuing straight, the app will give the driver the instruction "stay to the right to El Cajon Blvd." For drivers getting into the on-ramp, the app will say, "turn to the left to I-8 W."
+
===== Restricted areas (border control point, military base) =====
 +
When the [[best continuation|'''best continuation''']]''' is to a restricted area''', add a Continue TIO, paired with a named stub segment if necessary, to let users know they will be now entering a restricted area.  
  
===Unusual on-ramp===
+
===== Toll =====
A default surface-road-to-on-ramp "exit" instruction may be overridden with a "keep" in rare cases when (a) the originating highway's continuation path is unclear (such situations often require wayfinders as well) or (b) the on-ramp's initial departure continues to share direction and pavement with the originating highway, either for an unexpectedly long distance, or leading to two or more subsequent distributor on-ramps that are better instructed as exits than the initial departure. The latter application avoids issuing multiple "exit" instructions for what is effectively the same on-ramp. Aside from the above situations, overriding the default "exit" instruction for surface-road-to-on-ramp departures is not encouraged (see [[Turn_instruction_override#Common on-ramp|below]]).
+
When the [[best continuation|'''best continuation''']]''' is tolled''', marked or unmarked (toll roads, bridges, paid entrances into large areas, etc.), add a Continue TIO, paired with a named stub segment if necessary. For [[wikipedia:Barrier_toll_system|barrier-toll systems]], only at the beginning of the toll area.
{{clear}}
+
 
 +
==== Setting context in the instruction list ====
 +
Without a Continue TIO, the next instruction could be from an entirely different road or freeway. Adding a Continue TIO would help set context as to where the instructions are and increase the Wazer's confidence in the instructions given (or not given).
 +
 
 +
===== Terminus of a freeway =====
 +
Where a [[freeway|'''freeway''']]''' ends with a [[best continuation]] onto another freeway''', add a Continue TIO to indicate the name of the continuing road.
 +
 
 +
When possible, do this at a point where the user can use this TIO to make a mental confirmation.  
 +
 
 +
If the continuing freeway is ''signed before the terminus'', place the TIO at the last exit, similar to how a [[wayfinder]] is set up today.
 +
 
 +
If it ''isn't'' signed, place the TIO where the freeway merges into the next freeway.
  
===Continue onto on-ramp===
+
Consult with your state manager if the freeway status changes frequently or gradually, or if the freeway itself is insignificant. There could be multiple options as to what would be the best spot for a TIO, or if one is needed at all.{{clear}}[[File:TIO Continue Fwy2Fwy.PNG|thumb|[https://www.waze.com/editor/?env=usa&lon=-121.55793&lat=38.57557&s=111672595&zoom=6&nodes=52787464 Here], US-50 W ends. The Wazer can either take Exit 1A to I-80 E, or continue straight to I-80 W, as signed. Add a Continue TIO here with a stub segment for "to I-80 W / San Francisco".]][[File:TIO unsigned merge.png|thumb|There's no sign on I-505 N that says I-5 N. Add the TIO at the merge point where the user must merge onto I-5.|left]]{{clear}}
  
To reduce confusion, it is advised to use the "Continue" instruction in situations like a street heading directly onto a highway or freeway onramp, such as shown here.  
+
===== On-ramp to a freeway =====
 +
[[File:Wme_straight_ahead_onramp.png|left]]
 +
When the best continuation from a road (including off-ramps, parking lot roads, and [[rest areas]]) '''is an on-ramp to a freeway or expressway''', add a continue TIO.{{clear}}
  
[[File:Wme_straight_ahead_onramp.png]]
+
===== Continuing from an off-ramp =====
 +
Use a Continue TIO when the '''name of the best continuation at the end of a ramp is not immediately obvious'''. Here are two scenarios that it's not immediately obvious:
  
{{clear}}
+
{|style="margin: 0 auto;"
 +
| [[File:TIO unsigned ramp continuation.PNG|thumb|SE 36th St is never mentioned in the name or instruction of Exit 10B. Add a continue TIO for the continuation.]]
 +
| [[File:TIO double name continuation.png|thumb|While SE 37th St is named on the exit, it is ambiguous if it is the N-S road or the road straight ahead. Add a continue TIO for the continuation.]]
 +
|}
  
===When not to use===
+
==== Supplement a wayfinder ====
===Complex wayfinder===
+
Because controlling the turn angles in Waze will never produce a continue instruction, a Continue TIO must be set in places '''where a wayfinder is warranted for a particular direction, but "keep" or "exit" would be misleading'''.
A complex wayfinder is one where the legs (s-out) are named differently than the subsequent segments. The wayfinder segments are named for the Big Green Sign (BGS) verbiage for clarity.  
 
  
For these kinds of wayfinders, a turn instruction override does not have the required functionality and should not be used.
+
Add a continue TIO when:
 +
# '''All [[travel lanes]] are correct'''—telling a user to "keep" or "exit" would mean an unnecessary lane change to that side of the road out of caution; or,
 +
# Only the center lanes are correct in a '''3-way fork'''.
  
===Common on-ramp===
+
==== Best continuation is not the obvious continuation ====
An "exit" instruction for common on-ramp departures from surface streets, while not immediately intuitive for many new Wazers, is nevertheless Waze's current default. Overriding this default on a large scale could lead to problems. Meanwhile our only alternative, the "keep" instruction ("stay" in some voices), is not always significantly clearer. Except for [[Turn_instruction_override#Unusual on-ramp|rare cases]], overriding the default "exit" instruction for on-ramps is not encouraged.
+
Many times, when there are many turn lanes, many vehicles turning, and a plethora of signage, and straight ahead doesn't look like the right way to go, the Wazer may be hesitant that Waze is not issuing an instruction. Add a continue TIO to help assure the Wazer that continuing straight is the correct way.
  
==Identifying on the map==
+
Use selectively, and consult your fellow area managers for consensus.
#The default way to determine that a turn has an override set is to hover over the turn arrow.  
+
#
#[[Plugins#WME_Toolbox|Toolbox]] helps to make identifying turns with override instructions set.
 
  
 
[[Category:Waze Map Editor]]
 
[[Category:Waze Map Editor]]
 
[[Category:Style guide]]
 
[[Category:Style guide]]

Latest revision as of 20:27, 7 September 2017

WME provides an ability to override the turn instructions provided during navigation so that editors can customize those instructions to better match the reality of the road.

Use a turn instruction override whenever the default Waze selected instruction is not the desired instruction for the driver. The TIO replaces the default Waze selected instruction entirely, including the TTS and instruction list.

Don't worry about replacing existing intersection designs that currently produce the desired instruction, but using other means of doing so (such as micro-doglegs and a virtual stub segment). We can get to those as we need to.

How to use

Creation

Before you set a Turn Instruction Override, It is highly recommended that you consult with a State Manager or other senior editor.
Wme turn override hover2.png

When in WME and you click on a segment and hover over a green or yellow turn connection/restriction arrow, both the Time-based Turn Restriction (TBTR) clock and the Turn instruction Override (TIO) speaker icon will appear. If the turn is red (restricted), then the override icon will not appear.

Click on the TIO icon to select an override.


Available options

When you click on the speaker, you have the following choices: Wme turn override list.png

  • Waze Selected (default) (this gives the default voice prompt)
  • None (No instruction is given)
  • Turn left (The instruction "turn left" is given)
  • Turn right (The instruction "turn right" is given)
  • Keep left (The instruction "keep left" is given)
  • Keep right (The instruction "keep right" is given)
  • Continue
  • Exit left (The instruction "exit left" is given)
  • Exit right (The instruction "exit right" is given)
  • U-turn (The instruction "make a U-turn" is given)

When something other than "Waze Selected" is the selected option, the Instruction override speaker icon changes from Wme override speaker icon.png (cyan) to Wme override speaker icon active.png (orange). This icon is shown when you hover over a turn arrow.

Identifying on the map

  1. The default way to determine that a turn has an override set is to hover over the turn arrow.
  2. Toolbox helps to make identifying turns with override instructions set.

Removal

To remove a TIO, simply set the option back to Waze Selected.

When not to use

You don't like the Waze default

Don't use a TIO to override the default just because you don't like it. We can't manage changing thousands and thousands of intersections like this.

Override is the same as Waze selected

Do not set a TIO if the override would be the same instruction as the Waze-selected one. It just adds work for fellow editors to verify.

Complex wayfinder

A complex wayfinder is one where the legs (s-out) are named differently than the subsequent segments. The wayfinder segments are named for the Big Green Sign (BGS) verbiage for clarity.

For these kinds of wayfinders, a turn instruction override alone doesn't provide sufficient clarity. Use in conjunction with a wayfinder.

Common on-ramp

An "exit" instruction for common on-ramp departures from surface streets, while not immediately intuitive for many new Wazers, is nevertheless Waze's current default. Overriding this default on a large scale could lead to problems. Meanwhile our only alternative, the "keep" instruction ("stay" in some voices), is not always significantly clearer. Except for rare cases, overriding the default "exit" instruction for on-ramps is not encouraged.

Continue TIO

Obvious continuations

Keep calm! Our Wazers have memory better than a goldfish. They don't need to be reminded to Continue straight at every intersection. Wazers are already told when or how far their next turn is after every turn.

Not impactful or unsigned name changes

Keep the turn instructions useful; don't announce simple road name changes such as when a neighborhood road changes name or if the cardinal direction changes.

Similarly, some freeways are unsigned. We do not need to place TIOs when these begin or end, as they provide no value to the Wazer.

Intermediate barrier tolls

In keeping instructions useful, it would be superfluous to inform a Wazer of each and every intermediate toll barrier in a barrier-toll system.

When to use

U-turn

This works well for one way segments that have a u-turn only lane. You can post a "u-turn" verbal prompt on the first left turn and "None" on the second one.

Turn

Streets not meeting at right angles

Wme slight right overriden.png
When streets meet at some kind of diagonal, the default turn instruction may end up being a "stay to the left/right" even though the driver would consider it a left or right turn. Allow the segments to meet at their actual angles and create an instruction override so that the instruction the driver is expecting will be given.

Also consider: The departure angle in Waze Map Editor is also shown in the app closure interface. Angles which are too close, under 20° can overlap in the app, and so should be avoided.

At-grade connector

Depending on the length and angle of an at-grade connector, it may make sense for Waze to instruct "keep right/left" or "turn right/left". Use a TIO to ensure the the most appropriate instruction is given to the driver. An example of an at-grade connector using an instruction override is shown below:

Wme agc override turn instruction.png

Exit/keep

Exit left

Exit left bgs example1.png
When there is a the Big Green Sign (BGS) indicating an exit left. Discuss with your Regional Coordinator(s) and/or State Manager(s) to see if they want it added to locations where a HOV or HOT/Express Lane is separated from the regular freeway, highway, etc.
Wme turn override set hover.png

Simple wayfinder

Wme instruction override left and right.png
Simple wayfinders use a turn instruction override where an instruction would not normally be voiced. This is most often a "stay to the right" or "stay to the left." A basic example is a roadway with a split where left lanes turn left and right lanes go straight ahead.

To ensure the driver is kept on the correct side of the roadway to stay on the expected route, we create an instruction override to ensure the driver is given enough advance notice to make sure they are on the correct side

The image here is a composite showing both turns with the override set and which instruction has been applied in this specific case. Drivers continuing straight, the app will give the driver the instruction "stay to the right to El Cajon Blvd." For drivers getting into the on-ramp, the app will say, "turn to the left to I-8 W."

Unusual on-ramp

A default surface-road-to-on-ramp "exit" instruction may be overridden with a "keep" in rare cases when:

  1. the originating highway's continuation path is unclear (such situations often require wayfinders as well) or;
  2. the on-ramp's initial departure continues to share direction and pavement with the originating highway, either for an unexpectedly long distance, or leading to two or more subsequent distributor on-ramps that are better instructed as exits than the initial departure. The latter application avoids issuing multiple "exit" instructions for what is effectively the same on-ramp. Aside from the above situations, overriding the default "exit" instruction for surface-road-to-on-ramp departures is not encouraged (see below).

Continue

Unannounced roads with legal or financial implications

Restricted areas (border control point, military base)

When the best continuation is to a restricted area, add a Continue TIO, paired with a named stub segment if necessary, to let users know they will be now entering a restricted area.

Toll

When the best continuation is tolled, marked or unmarked (toll roads, bridges, paid entrances into large areas, etc.), add a Continue TIO, paired with a named stub segment if necessary. For barrier-toll systems, only at the beginning of the toll area.

Setting context in the instruction list

Without a Continue TIO, the next instruction could be from an entirely different road or freeway. Adding a Continue TIO would help set context as to where the instructions are and increase the Wazer's confidence in the instructions given (or not given).

Terminus of a freeway

Where a freeway ends with a best continuation onto another freeway, add a Continue TIO to indicate the name of the continuing road.

When possible, do this at a point where the user can use this TIO to make a mental confirmation.

If the continuing freeway is signed before the terminus, place the TIO at the last exit, similar to how a wayfinder is set up today.

If it isn't signed, place the TIO where the freeway merges into the next freeway.

Consult with your state manager if the freeway status changes frequently or gradually, or if the freeway itself is insignificant. There could be multiple options as to what would be the best spot for a TIO, or if one is needed at all.
Here, US-50 W ends. The Wazer can either take Exit 1A to I-80 E, or continue straight to I-80 W, as signed. Add a Continue TIO here with a stub segment for "to I-80 W / San Francisco".
There's no sign on I-505 N that says I-5 N. Add the TIO at the merge point where the user must merge onto I-5.
On-ramp to a freeway
Wme straight ahead onramp.png
When the best continuation from a road (including off-ramps, parking lot roads, and rest areas) is an on-ramp to a freeway or expressway, add a continue TIO.
Continuing from an off-ramp

Use a Continue TIO when the name of the best continuation at the end of a ramp is not immediately obvious. Here are two scenarios that it's not immediately obvious:

SE 36th St is never mentioned in the name or instruction of Exit 10B. Add a continue TIO for the continuation.
While SE 37th St is named on the exit, it is ambiguous if it is the N-S road or the road straight ahead. Add a continue TIO for the continuation.

Supplement a wayfinder

Because controlling the turn angles in Waze will never produce a continue instruction, a Continue TIO must be set in places where a wayfinder is warranted for a particular direction, but "keep" or "exit" would be misleading.

Add a continue TIO when:

  1. All travel lanes are correct—telling a user to "keep" or "exit" would mean an unnecessary lane change to that side of the road out of caution; or,
  2. Only the center lanes are correct in a 3-way fork.

Best continuation is not the obvious continuation

Many times, when there are many turn lanes, many vehicles turning, and a plethora of signage, and straight ahead doesn't look like the right way to go, the Wazer may be hesitant that Waze is not issuing an instruction. Add a continue TIO to help assure the Wazer that continuing straight is the correct way.

Use selectively, and consult your fellow area managers for consensus.