Roundabouts, rotaries, or traffic circles, are unique segments of roadway in the Waze router. When a driver approaches a roundabout, a specific icon is displayed in the turn direction area of the display with a number corresponding to the exit count from the driver's entry into the roundabout. Manually creating a circular road will not tell Waze to navigate the area as a roundabout.
- 1 Creating a roundabout from an intersection
- 2 Creating a roundabout from nothing
- 3 Editing existing roundabouts
- 4 Road Type
- 5 Entrance and exit road segments
- 6 Understanding navigation instructions
- 7 Adjusting geometry
- 8 Junctions
- 9 (Re)Moving a road from a roundabout
Creating a roundabout from an intersection
Often times, when streets become more congested, planners will install a traffic circle, or roundabout, to get traffic to flow more freely. This section shows you the steps to get from an existing intersection to a new roundabout.
The situation starts out like this, where the roads are no longer aligned with the new plan, and now there is a roundabout which we need to get created in Waze:
This situation is fairly simple because all the segments are connected together already.
If you look closely, you will see this roundabout actually does have four entrance/exits, so let's also draw in the western road as just a small stub, for future use. This will also cause the roundabout to give the driver better instructions in terms of which exit to take, as a driver will see the stub exit in real life, and so will count that as an exit.
Once those are all created, go ahead and save the work.
If an oval or elliptical roundabout is required, hold down the Shift key. At this time only oval roundabouts along the North/South or East/West axis can be created. If an alternate shape or axis is desired, create a circular roundabout that is close to the correct shape and adjust the nodes manually.
WARNING: Any segments completely within the roundabout area WILL BE DELETED.
When the process is complete and the Save button has been clicked on one last time, this is how the new roundabout looks:
For further reference, please watch this video on roundabout creation.
Creating a roundabout from nothing
Create one or more roads leading into the center of the roundabout area. Use the visual map to align the roads leading into the roundabout. From there create the roundabout just as is described above for converting an intersection to a roundabout.
Note that there must be at least one road leading inside the area of the roundabout being created, otherwise no roundabout will be created when you use that option.
Editing existing roundabouts
A well-meaning editor probably just didn't know how to create a new roundabout, so it was created by hand manually setting the segments as close to rounded as possible. The real problem is that Waze will not navigate these segments like a roundabout. This section of roadway will produce "turn right and then turn right" if you went straight through. This is not what the driver will expect:
A proper roundabout will tell you to "enter the roundabout and take the first exit" when going straight through, so we need to fix this "fake" roundabout.
If the visual map layer does not show a new roundabout that exists today, use the GPS tracking layer to estimate where the center of the roundabout is located.
After confirming the individual roundabout road segments, there is now a properly-formed roundabout which will give the correct routing instructions:
Note that you cannot create a roundabout with only one segment. You must have the roundabout be intersected by two or more roads. After reviewing the Junction Style Guide for the alternative of a loop or just dead-end and you still believe it should be a full roundabout, just create the roundabout with two segments. When complete the second segment can be deleted leaving the roundabout portion split into two segments.
If when creating your roundabout you do not cross any roads, the roundabout cannot be created. There must be at least one road connected.
It is possible to have multiple types of roads (Streets, Primary Streets, Minor Highway, etc.) meeting at a roundabout.
To minimize inefficient routing, we need to be careful with what type we assign to the Roundabout itself. We want to minimize any penalty going from connected roads, but we also do not want to make the Roundabout too "attractive" where we encourage routing through it when unnecessary.
Since a Roundabout is not a Limited Access Interchange, we ignore any Freeway segments in this discussion. The road types we are interested in are, in order from highest to lowest, Major Highway, Minor Highway, Primary Street, Street. We will consider Service Road, Private Road, and Parking Lot Road the same as Street for now.
To determine what road type to use for the Roundabout:
- Identify the two connected segments with the HIGHEST type
- If a road is split into two one-way road segments, count the pair of one-way roads as a single segment in this count.
- The two connected segments with the highest type may have the same type or different types.
- If a ramp connects to the Roundabout, use the road type to which that ramp connects.
- Pick the LOWEST type of those two segments.
Entrance and exit road segments
The road segments leading into and out of a roundabout are generally drawn as simple two-way roads connected perpendicular (90 degrees) to the roundabout circle itself. This makes it easier on the user to visualize the map into reality by not having the incoming lanes appear separately on the map and only see the exits. The client app will tell the driver to take the second exit, so this way the driver can see on the map how far away that is in the roundabout from where they are now.
In some cases the incoming and exit road segments may be so far away from each other that it would be better to have them split into two separate one-way segments.
- What is a normal roundabout?
- When will I get ‘turn right’ / ‘continue straight’?
- When will I get ‘take the X exit’?
If a roundabout is normal, you will get ‘turn right / left’ or ‘continue straight’. If it’s not normal, you will get ‘take the X exit’.
What is a normal roundabout? It is one with up to 4 nodes, and a central node. All nodes are aligned within normal range of the entry point, when you imagine an X-Y axis which starts from the entrance point and through the middle node. So this means the same roundabout can count as ‘normal’ when coming from one node, and ‘not normal’ when coming from a different one. Some example will help explain this.
For the sake of simplicity, let’s look at a roundabout with three exits.
Each time you approach this roundabout (from one of the three nodes) an imaginary line is drawn from your entrance and through the central node.
The angle on the segment approaching the node does not matter for this calculation. It could be either one of the two, or anywhere in between.
Coming from node #1, this is how we see the roundabout:
Both exits 2 and 3 are within the normal range (90 +/- 30 and 180 +/- 30). In this case both of them will get an instruction to ‘turn right’ or ‘continue straight’
Coming from node #3, this is how we see the roundabout:
Both exits 1 and 2 are not within the ‘normal’ range – both will get a ‘take the X exit’. Note: even if one of these exits was within normal range, the roundabout itself will be ‘not normal’ and all exits will get the ‘take the X exit’ prompt. The entire roundabout must be normal.